If your team spends every afternoon squinting at their screens or pulling the blinds down, you’re not alone. Glare is one of the most common complaints we hear from Sydney offices, especially in glass-fronted buildings and open-plan floors. Closing the blinds fixes the glare, but it also shuts out the daylight and the view, and everyone ends up working under the lights. Window film offers a middle ground.
Why offices get so much glare
Glare happens when there’s far more light coming through the glass than the room and the screens can handle. In offices it usually comes from:
- Direct sun on north- and west-facing windows, often worst in the afternoon.
- Reflected light bouncing off neighbouring glass towers, water or light-coloured buildings. This catches many offices by surprise, because it can affect windows that never get direct sun.
- Large areas of glass such as floor-to-ceiling windows, glass walls and shopfronts.
- Desk layout: screens facing a window, or with a window directly behind them, are hit hardest.
The result is eye strain, screens that are hard to read, hot spots near the windows and a constant battle over the blinds.
How window film reduces glare without darkening the room
Solar control films reduce the amount of visible light and heat coming through the glass, which takes the harsh edge off direct and reflected sun. The key is choosing the right level. Films range from light, almost clear options that take the edge off glare, to darker or more reflective films for windows that face the full afternoon sun.
For most offices the goal is to cut glare enough that screens are easy to read with the blinds up, while keeping the space bright and the view clear. That’s why we don’t recommend one film for every window. A west-facing meeting room may need a stronger film than a south-facing workstation area on the same floor.
What else changes when the glare goes
- Cooler workspaces: quality solar films can block up to 80% of solar heat, so the desks near the windows stop being the ones nobody wants.
- Lower cooling load: less heat through the glass means the air conditioning doesn’t have to work as hard on hot afternoons.
- UV protection: our films block up to 99% of UV rays, which helps stop carpets, furniture and fit-outs fading.
- More daylight in use: when the blinds can stay up, the office keeps its natural light and outlook.
- Daytime privacy: some solar films also make it harder to see in from outside during the day.
Choosing the right film for your office
A few things decide which film suits each part of the office:
- Which way the windows face and when the glare happens: morning, afternoon or all day.
- How the space is used: open-plan desks, meeting rooms with screens, reception or retail.
- The look of the building: some owners and building managers prefer a neutral, non-reflective finish, and some buildings have rules about how the glass looks from outside.
- The type of glass: tinted, laminated, double-glazed and Low-E glass all need the right film. Our guide to tinting double-glazed and Low-E windows explains why.
If privacy is part of the problem too, for example meeting rooms or glass partitions, frosted window film can be combined with solar film elsewhere on the same floor. You can also read how office window film compares with window tint.
Not sure whether you need film or tint? Our guide to office window film vs window tint explains the terms.
Minimal disruption to your business
Office tinting can usually be planned around your working hours, including early starts, after hours or weekends for busy floors. Film goes on the inside of the existing glass, so there’s no window replacement, no building works and staff can keep working nearby. See what to expect on installation day for the step-by-step process.
How we help
We start with a free onsite assessment. We look at where the glare comes from, how each area is used and what type of glass you have, then recommend 3M or LLumar films to suit, and we can show you film samples on your own windows. Find out more on our commercial window tinting page. Working from home and dealing with the same problem? Our home window tinting covers that too.
Platinum Tint Solutions is based in Chatswood and works across Sydney, from the CBD and North Sydney to Parramatta and Macquarie Park. Contact us or call 0402 726 283 to book your free onsite assessment.